Sharkoon SCORPIO 2000 Specifications download pdf (Page 12)

scorpio 1000/2000

5.4 2.5" HDD cage

1. Inserta2.5“HDD/SSDintoadrivebayofthe2.5“HDDcageuntil

 itlocksinsidethepre-installedplasticrail(g.13).

 g.13

2. Connect the inserted HDD to the mainboard.

6. Installing a PSU

1. PutthePSUfromtheinsideagainstthePSUbracketonthecase’s

 backside(g.14).

            g.14

Note:

The PSU may be installed in two different directions: either the

fan points upwards (towards the mainboard) or the fan points

downwards (towards the ﬂoor).

2. ScrewthePSUtothecasefromtheoutside(g.15).

 (ScrewsforPSUmounting)

 g.15

3. Connectthecircuitboard’s4-pinpowerconnectortoamatching

 powerplugofthePSU(g.16).

 g.16

1 2 ... 7 8 9 10 11 12 13 14 15 16

No comments

Sharkoon SCORPIO 2000 Specifications Page 12