Sharkoon SCORPIO 2000 Specifications download pdf (Page 14)

scorpio 1000/2000

8. Installing an add-on card

1. Remove the slot bezel from its attachment.

2. Inserttheadd-oncardintothemainboard’srespectiveslotand

 screwittothecase(g.19).

 (Screwsfordrive/mainboardmounting)

 g.19

9. The pre-installed fans

1. The pre-installed case fans provide a 3-pin mainboard plug each.

2. Connect the plugs to either the respective mainboard or fan

 connectorofthecircuitboard(g.20).

 g.20

10. Installing additional fans /

optimized airﬂow

10.1 Side panel

1. Placethefan(1x200mmor2x120mm)againsttherespective

fan bracket from the inside. Screw the fan to the side panel from

the outside.

2. Connectthefan’spowerconnectortothemainboardorthePSU.

1 2 ... 9 10 11 12 13 14 15 16

No comments

Sharkoon SCORPIO 2000 Specifications Page 14